Feniks robots
Feniks robots will maintain a work area range from 700m2 of 1000m2. Once the perimeter wired is installed to set the required work, it will mow up to 4 separated work zones. After 3 hours of operation, when the battery is running low or when it finishes its schedule work the robot will return to home to its charging station. Moreover, if it is raining at the schedule time to mow, the mower will return back to it’s home station until after the rain has stopped.
This robot has an adjustable cutting height of between 3cm and 5cm. This mower will travel at 21 metres per minute at a cutting width of 17cm. The mower houses 4 fixed blades that rotate at 4500 rpm. Additionally, this robot will tackle slopes of up to 25 degrees while travelling and 15-20 degrees on the perimeter wire.
Feniks Robot Mowers
Feniks robot Accessories
-
Lawnba Virtual Wire Terminal (charging station)
0 out of 5Replacement Virtual Wire Terminal for all E1600 and E1800 models
In stock
-
Lawnba Emergency Switch pre 2019
0 out of 5Replacement Lawnba Emergency Switch
Suits pre 2019 E1800 E1800S E1800S4 E1800S2
In stock
-
Lawnba Charging Station PCB
0 out of 5Replacement Lawnba Charging Station PCB
Suits E1600 E1800 E1800S E1800S4 E1800S2
In stock
-
Lawnba Main PCB
0 out of 5Replacement Main PC board
Suits E1600 E1800 E1800S E1800S4 E1800S2
In stock
-
Lawnba Replacement Battery 2.2Ah
0 out of 5Replacement battery for E1800 models.
24-28 Volt, 2.2 Ah lithium battery with connector.
No Local Stock Available
-
Lawnba E1800S2 Blade Shield & MoeBot 800 Blade Shield PN 48
0 out of 5Replacement Blade Shield for Lawnba E1800S2 and MoeBot 800 models.
Does not include screws or blades screws or Blades.In stock
-
Lawnba Cutting Motor Controller PCB-New Style (Brushless)
5.00 out of 5Replacement New Style Brushless Motor Control PCB for E1600 models. (Requires new style motor)
No Local Stock Available
-
Lawnba Cutting Motor – New Style (Brushless)
5.00 out of 5Replacement New Style Brushless Motor for E1600 models. (Requires new style controller)
No Local Stock Available
-
Rubber High Traction Wheels (suits E1600 & E1800 models)
0 out of 5Rubber Treaded High Traction wheels for all Exgain E1600 & E1800 models. Suitable for hard or soft ground surfaces.
*SOLD INDIVIDUALLY*
In stock
-
Lawnba Front Wheel (Pre 2019)
0 out of 5Replacement Virtual Wire Sensor for all E1600 and E1800 models.
In stock
-
Lawnba Front Wheel (Post 2019)
5.00 out of 5Replacement Virtual Wire Sensor for all E1600 and E1800 models.
In stock
-
Lawnba E1600 Display Cover
0 out of 5Replacement Virtual Wire Sensor for all E1600 and E1800 models.
In stock
-
Lawnba Virtual Wire Sensor
0 out of 5Replacement Virtual Wire Sensor for all E1600 and E1800 models.
In stock
-
Lawnba Cutting Motor (Brushed)
0 out of 5Replacement Brushed Cutting Motor for E1800S models.
In stock
-
Lawnba Drive Motor (E1800 & E1600 Models)
5.00 out of 5Replacement Drive Motor for E1800 & E1600 models.
In stock
-
Lawnba Cutting Motor (Brushless)
0 out of 5Replacement Brushless Motor for E1800 & E1600 models.
In stock
-
Lawnba Replacement Power Supply
5.00 out of 5Replacement power supply for E1800 & E1600 models.
In stock
-
Lawnba Protective Shield (Suits E1800 Models) PN 08
0 out of 5Replacement Protective Shield for Exgain E1800 models.
Does not include screws or blade shield or Blades.In stock
-
Lawnba Protective Shield (Suits E1600 Models) PN 07
0 out of 5Replacement Protective Shield for Exgain E1600 models.
Does not include screws or blade shield or Blades.In stock
-
Lawnba Blade Shield (Suits E1600 Models) PN 34
5.00 out of 5Replacement Blade Shield for Exgain E1600 models.
Does not include screws or blades screws or Blades.In stock
-
Lawnba Blade Shield (Suits E1800 Models) PN 48
0 out of 5Replacement Blade Shield for Exgain E1800 models.
Does not include screws or blades screws or Blades.In stock
-
Replacement Battery 6.6Ah
0 out of 5Replacement battery for E1800 & E1600 models.
24-28 Volt, 6.6 Ah lithium battery with connector.
In stock
-
Lawnba Replacement Battery 4.4Ah
0 out of 5Replacement battery for E1800 models.
24-28 Volt, 4.4 Ah lithium battery with connector.
In stock
-
Lawnba Cutting Blades (suit E1800 models)
0 out of 5Replacement Cutting blades for all E1800 models. Comes with replacements fixing screws.
In stock
-
Lawnba Cutting Blades (suits E1600 models)
5.00 out of 5Replacement Cutting blades for all E1600 models. Comes with replacements fixing screws.
In stock
-
High-Traction Wheels (suits E1600 & E1800 models)
0 out of 5High Traction wheels (Qty 2) for all Exgain E1600 & E1800 models. Suitable for soft ground surfaces.
Provides greater traction for slopes*SOLD INDIVIDUALLY*
In stock