Search
Close this search box.

Share

Feniks L310-2A

$949.00 (AUD$ Including GST)

No Local Stock Available

Description

Feniks L310-2A will maintain a maximum work area of 700m2. It will cut approximately 50m2 per hour and 75m2 per battery charge. Once the perimeter wired is installed to set the required work, it will mow up to 4 separated work zones. When it finishes its schedule work or the battery is running low, the robot will return to home to its charging station. Moreover, if it is raining at the schedule time to mow, the mower will return back to it’s home station until after the rain has stopped.

Feniks robot Features:

  • Safety – This Robot Lawn Mower has bump sensors that stop the mower and turn it around when it hits an unexpected obstacle. If the unit is lifted during operation it will stop travel and the cutting blades. It also has a large easily accessed Emergency Stop button on top to manually stop the mower when needed.
  • Security – Programmable with a security pin code. The mower is unable to be operated without the correct code and the correct charging station.
  • Mowing Features – With an adjustable cutting height of between 3cm and 5cm this mower will travel at 21 metres per minute at a cutting width of 17cm. The mower houses 4 fixed blades that  rotate at 4500 rpm. This robot will tackle slopes of up to 25 degrees while travelling and 15-20 degrees on the perimeter wire.
  • Other Features – Very low noise at less than 57dB. Fully programmable LCD control panel, Weather resistant for continuous outdoor use, this Robot Lawn Mower is not required to be housed or protected from the elements, but it is highly recommended to house the robot mower in a fully shaded location. 2.2Ah Lithium battery which takes up to 1.5 hours to charge and allows for up to 1.5 hours of operation.

[carousel_slide id=’22221′]

In the Feniks Box:

  • Feniks L310-2A Robot Lawn Mower
  • L310-2A Charging Station
  • Australian Compliant Power Supply
  • 2 Charging Connection Pins
  • 4 Charging Station Fixing Pegs
  • 1 Set of Spare Mower Blades
  • 200 metres of Perimeter Wire
  • 140 metres of Wire Pegs
  • 1 Charging Pin Spanner

unbox-robot-lawn-mowers-australia-2561324-E1800T_Unboxing.w1024

Additional information

Lawn Mowers
Brand

Feniks

Motor Type

Brushless

Motor Power

85 Watts

Running Time per Charge

Up to 1.5 Hours

Cutting Width

17cm

Cutting Blades

4 x Fixed Razor type

Cutting Height

3cm – 5cm

Noise

<57 dB

Warranty

1 Yr Standard (Ext Available)

Key Capabilities
Area Capacity

700m2 (-20% Recommended)

Installation Type

Boundary Wire

Multi Zone

4 Zones

Max Allowable Slope

45% Gradient

Max Consistent Slope

45% Gradient

Max Edge Slope

35% Gradient

Travel Speed

21 metres per minute

Battery Charging Time

1.5 Hours

Battery Voltage & Capacity

20V / 2.2Ah

Type of Battery

Lithium Ion

Battery Charge Method

Contact – Auto Return to Base

Battery Charge Rate

2 Amp

Safety Features
Bump Sensor

Yes 360deg Sensing

Emergency Stop

Yes

Lift/Tilt/Rollover Sensor

Yes (45 deg approx)

Cutting System
Cutting Blade Speed

4500 rpm

Cut to Edge (Offset Blades)

No

Communication and Interface
Connectivity

No

LED Display

Yes

App Control

No

Smart Home Integration

No

Anti-theft

4 Digit Security Pin

Program Settings
Eco Mode

No

Perimeter Cut Mode

Yes (Manual & Scheduled)

Rain Sensor

Yes (Configuable)

Schedule Mowing

Yes (Local & App)

Other Features
Waterproof

IP54

Rear Wheels

160mm Hard Rubber

Front Wheels

2 x 58mm

Included Equipment
Base Station

Yes

Base Station Cover

No

Base Station Fixings

4 Nails

Perimeter Wire

200 mt

Perimeter Wire Pegs

140 ea

Weights and Dimensions
Box Dimensions

60cm x 41cm x 32cm

Box Gross Weight

11.5kg

Product Only Dimensions

49cm x 34cm x 22cm

Product only Weight

6.1kg

More
Max Perimeter wire Length

400 metres

Self Leveling

No

Color

Performance

Domestic

Weight 16 kg
Dimensions 71 × 51 × 31 cm

Reviews

There are no reviews yet.

Be the first to review “Feniks L310-2A”

Have you checked where your maximum edge slope is?

The maximum edge slope should be placed within 1 meter of the boundary wire to prevent lawn damage from the robot lawn mower’s wheels.

Learn more about slopes

Compare Products
Independently verified
528 reviews
0